Fenix LD22 V2.0 Flashlight

Max Lumens: 800
Modes: 7
Battery: AA or Pack

You must be logged in to make a purchase.

The upgraded Fenix LD22 V2.0 is a multi-use flashlight with a slim body design, multiple power options and great performance—perfect for just about every lighting task. This AA battery powered flashlight now includes a rechargeable li-ion battery pack. You not only get a great USB Type-C rechargeable power source, but you also get increased performance with a maximum 800 lumens of light. As an alternative, you can use alkaline or NiMH AA batteries for a maximum 350 lumens. The LD22 V2.0’s slim design, 0.7” round, and reversible clip make it a great every day carry choice. Made of durable A6061-T6 aluminum, the LD22 V2.0 is impact resistant and waterproof underwater to 2 meters. 7 lighting modes including a strobe, SOS round out this great daily-use flashlight.

Your discount is limited to 3 per SKU and a total of 7 items per year. For large quantity purchases, contact our Agency Sales Division at (888) 775-9996 x6
Max Lumens: 800
Modes: 7

Description

Max Brightness:

800 lumens

Max Beam Distance:

702 feet (214 meters)

Max Runtime:

220 hours

Lighting Modes:

5 brightness levels, strobe and SOS

Bulb Type:

Luminus LED

LD22 V2.0 Size:

Length: 5.83” (148mm)
Body: 0. 85” (21.5mm)
Head: 0.71” (18mm)

LD22 V2.0 Weight:

3.39 oz. (96g) including battery

Battery Type:

One included rechargeable li-ion battery pack or two included AA batteries

Included:

ARB-L14-1100U Li-ion rechargeable battery pack, 2 Pairdeer AA Alkaline batteries, USB Type-C charging cable,Holster, Lanyard, Spare O-ring

Warranty:

Limited Lifetime Guarantee from Fenix Lighting USA

Additional Features of the LD22 V2.0 Flashlight

  • Uses a Luminus LED with a lifespan of 50,000 hours.
  • AA battery flashlight with the option to use a rechargeable battery pack.
  • Included 1100mAh battery (with Type-C port), included 2 x AA and 14500 batteries.
  • Instant activation with the tactical tail switch; output selection with the functional side switch.
  • Detachable two-position body clip for varying conditions.
  • Reverse polarity protection, to protect from improper battery insertion.
  • Digitally regulated circuit for maintaining a stable output.
  • Made of durable A6061-T6 aluminum.
  • Premium type HAIII hard-anodized anti-abrasive finish.

Operating Instructions for the LD22 V2.0 Flashlight

On/off
The tail switch is the tactical switch and the side switch is the functional switch. Tap the tactical switch to momentarily turn on the light, release the light will go out.

Fully press the tactical switch to constantly turn on the light, press again to turn off the light.

Output Selection
With the light switch on, single click the functional switch to cycle through Eco →Low→Med →High→Turbo. (Turbo can not be activated if uses AA battery)

Flash Mode
With the light switched on, press and hold the functional switch for 0.5 seconds to enter flash mode, single click again to cycle through Strobe→SOS. Press and hold the functional switch again for 0.5 seconds to turn back to the previously used general mode.

Intelligent Memory Circuit
The light memorizes the last selected output excluding strobe. When turned on again the previously used output will be recalled.

Battery Specifications

Type Dimensions Nominal Voltage Usability  
Fenix ARB-L14-1100U* 14*100 3.6V Recommended √√
NiMH Battery AA 1.2V Recommended √√
Alkaline Battery AA 1.5V Usable

* ARB-L14-1100U can be directly charged with the USB Type-C charging cable.

Battery Replacement
Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tail back on.

Charging

  1. Switch off the light and loosen the light tail to take out the ARB-L14-1100U and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the battery.
  2. The indicator will display red while charging and will turn blue when fully charged.
  3. Once charging is completed, be sure to insert the battery with the anode side (+) towards the light head.

Intelligent Overheat Protection
The light will accumulate a lot of heat when used at relatively high modes for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user to reselect the modes.

Low-voltage Warning
When the voltage level drops below 3V, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When the voltage level is detected lower than 3V in Eco output, then the flashlight blinks 3 times every 5 minutes to remind you to timely recharge or replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work till the battery level runs out.

Note: This only works with Fenix ARB-L14-1100U rechargeable Li-ion battery and other usable Li-ion batteries.

LD22 V2.0 Usage and Maintenance

  • Disassembling the sealed head can cause damage to the light and will void the warranty.
  • Fenix recommends using only a high-quality protected battery.
  • If the light will not be used for an extended period, remove the battery for proper storage.
  • Unscrew the tail cap or remove the battery to prevent accidental activation during storage or transportation.
  • Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
  • Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
    A: Poor battery level.
    Solution: Recharge or replace the battery.
    B: The contact or contact point of the battery or flashlight is dirty.
    Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact your authorized distributor.

Safe Use Warnings

  • Do place this light out of the reach of children!
  • Do NOT shine the light directly into the eyes of anyone!
  • Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperature!
  • Do NOT use the light in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the light or internal battery fails!
  • This light will accumulate a lot of heat while working, resulting in a high temperature of the flashlight Pay attention to safe use to avoid scalding.
  • Turn off and lock the light or remove the battery from the light to prevent accidental activation when the light is placed in a closed and flammable environment such as pockets and backpacks!

The LED of this flashlight is not replaceable; so the whole light should be replaced when the LED reaches the end of its life.

You may also like…